Installing angstrom

If you do not end up getting the Angstrom login screen as shown in the previous section, please try the procedure documented below. Out of the box, the board will boot from the default bootloader on the SD card.

If you modify this card or want to boot from a different device, you will need to reestablish the automatic boot path. Ensure the devices, and only the devices, you intend to boot from are installed. Select the Shell from the EFI boot menu, or allow it to timeout and start the shell automatically. From within the shell, initialize all the devices with:. To automatically boot the bootia From now on, so long as that device remains connected and at that path, the firmware will boot it directly, skipping the boot menu and the EFI shell.

From eLinux. Jump to: navigation , search. Jump to: navigation , search. Back to the MinnowBoard home page Summary In this guide, we will learn how to install a software package in Angstrom which is an embedded Linux distribution. Steps First step is to make sure that the MinnowBoard has internet connectivity. Connect one end of an Ethernet wire to the gigabit Ethernet port on the MinnowBoard and the other end to your router. The figures below illustrates the same: Power on the MinnowBoard and login to Angstrom.

Refer this link for more detailed information on how to do it. Create a free Team What is Teams? Collectives on Stack Overflow. Learn more. Asked 7 years, 7 months ago. Active 6 years, 9 months ago. Viewed 3k times. Improve this question. I followed step on this link elinux. But I have a Ubuntu machine. Therefore I didn't have to use DiskImager and 7-zip. But I did have to flash a the SD card about 3 times before I got it working.

In my case it took about minutes to load the kernel to on board flash. Good Luck — Mahendra Gunawardena. We know that your project is important to you, and you want to get started as quickly as possible.

Our simple-to-install cleanrooms make sure that you can do just that. With an Angstrom Technology cleanroom, your project will be up and running in no time.